Support
Something not working, or an idea for NoiseScope? Email support@noisescope.app. Please include your iPhone model and iOS version. We usually reply within a few days.
The in-app guide (Settings → How to use NoiseScope) explains every screen.
Common questions
How accurate are the readings?
iPhone microphones are good but not certified. Uncalibrated, readings can be off by about 5–10 dB, and the app marks them as uncalibrated. Calibrated, they are much closer for everyday noise, though still not a replacement for a professional meter. iPhone microphones pick up little below 50 Hz and can't measure much quieter than about 30 dB(A). For legal measurements, use a certified sound level meter.
How do I calibrate?
Go to Settings → Calibration. Best: put a 94 dB / 1 kHz acoustic calibrator on the microphone and tap Match. Or hold the phone next to a reference sound level meter, enter what it reads and tap Match. To make several phones agree with each other, link them in Compare, hold them side by side for 30 seconds, then long-press a phone and choose Match.
The phones don't find each other
Every phone needs NoiseScope open on the Compare tab with Link phones nearby switched on, and Wi-Fi and Bluetooth turned on (they don't need to be on the same network). If iOS asked about the local network, allow it, or turn it on later in iOS Settings → Privacy & Security → Local Network → NoiseScope.
How does "Find the source together" work?
You need 3 or more linked iPhones (4 or more for steady noise like a hum). Open the 3D Map on every phone and point all cameras at the same part of the room for about 10 seconds so they share one 3D space. Then spread out at least 2 m apart, with one phone near the middle. The live plan shows where the noise most likely comes from. With only 3 phones there can be two possible spots; a bang (a knock or a clap) usually settles it.
The 3D Map doesn't work on my iPhone
The 3D Map needs a LiDAR scanner, found on iPhone 12 Pro and later Pro models. The meter, frequency analysis, limits, reports and phone linking work on any supported iPhone.
Is my audio recorded or uploaded?
No. Sound is analysed live and discarded. Short clips are only kept if you switch on clip saving for events, and then only on your iPhone. See the privacy policy.
I tapped "Don't Allow" for the microphone or camera
Open iOS Settings → NoiseScope and turn on Microphone and Camera.